Moglice
Find the right product solutions
Any type of slideway for new production or overhaul. It can be puttied, poured or injected and is the essentially price worthier than any conventional system.
The result is:
• 1:1 correct to the micron with high wear resistance
• easily coated with perfect long term adhesion
• best damping properties = improvement of stiffness
• scatter-free start = optimized Anti Stick-Slip behavior
Fields of Application:
• round bushings
• slide bearings of any kind in large machine tools
• hydraulic pistons
• keyways
• column ways
• carriage slideways
• tooth racks
• ram guides
• hydrostatic guides
• support guideways
• aerostatic bearings
• deep hole bushings
• and many more guideways
DIAMANT moglice enables dynamic elements, e.g. slideways to run easily, protects from wear & tear and lowers buying as well as running costs. High wear resistance and improved stiffness are just 2 highlights of DIAMANT moglice.
Metal, what else do you need?
DIAMANT moglice does not change its Anti-Stick-Slip properties even under unfavourable conditions such as inadequate lubrication or high loads. When used on cast iron the friction value at rest, for example, is only about 1/7 of the conventional cast iron/steel pairing.
Survey of further benefits:
• applicable in place without special knowledge,
• high dimensional stability, shrinkless cure
(hardly measurable)
• optimum adhesion (individual coatings)
• wear proof even after decades
• easily moulded or injected.
Ready! – after cure.
• rational & rapid, with high long term results.
There is always an exact moulding from the precision ground bred- counterways after alignment.
The Consequences:
Excellent running properties, free of Stick-Slip with high stability and hardly measurable wear.
DIAMANT Moglice has been used Worldwide … by leading machine makers, machine tool builders with the
• putty moulding method
• injection method
• for way constructions and overhauls
Moglice 628
Moldable low friction way-liner to produce high-precision slideways with anti-stick-slip properties. The molding method allows to create complex forms and structures down to the micron without mechanical machining. It helps to reduce production times in modern production engineering. The material can either be caused to stick to the molding surface or to be released by the inclusion of a micro thin layer of release agent. The result is an exact replica of the tool surface even down to the finest surface texture.
Typical Applications:
Low friction slideways
Slideways repair coatings
Bushings
Lead screw nuts
Spheres
Hydrostatic bearings
Complex replicated running surfaces
Safety Data Sheets:
SDS Hardener
SDS Moglice 628 Resin
Moglice 628
Moglice 1000 Semi
Is a moldable low friction way-liner to produce high-precision slideways with anti-stick-slip properties. The molding method allows to create complex forms and structures down to the micron without mechanical machining. It helps to reduce production times in modern production engineering. The material can either be caused to stick to the molding surface or to be released by the inclusion of a micro thin layer of release agent. The result is an exact replica of the tool surface even down to the finest surface texture.
Typical Applications:
Low friction slideways
Slideways repair coatings
Bushings
Lead screw nuts
Complex replicated running surfaces
Safety Data Sheets:
Hardener
Moglice 1000 Resin
Moglice 1000 Semi
Moglice 1000FL
Is a moldable low friction way-liner to produce high-precision slideways with anti-stick-slip properties. The molding method allows to create complex forms and structures down to the micron without mechanical machining. It helps to reduce production times in modern production engineering. The material can either be caused to stick to the molding surface or to be released by the inclusion of a micro thin layer of release agent. The result is an exact replica of the tool surface even down to the finest surface texture.
Typical Applications:
Low friction slideways
Slideways repair coatings
Bushings
Lead screw nuts
Complex replicated running surfaces
Safety Data Sheets:
Hardener
Moglice 1000FL Resin
Moglice 1000 FL
Moglice 1000P
Is a moldable low friction way-liner to produce high-precision slideways with anti-stick-slip properties. The molding method allows to create complex forms and structures down to the micron without mechanical machining. It helps to reduce production times in modern production engineering. The material can either be caused to stick to the molding surface or to be released by the inclusion of a micro thin layer of release agent. The result is an exact replica of the tool surface even down to the finest surface texture.
Typical Applications:
Low friction slideways
Slideways repair coatings
Bushings
Lead screw nuts
Complex replicated running surfaces
Safety Data Sheets:
Hardener
Moglice 1000P Resin
Moglice 1000P
Moglice FLP
Moldable low friction way-liner to produce high-precision slideways with anti-stick-slip properties. The molding method allows to create complex forms and structures down to the micron without mechanical machining. It helps to reduce production times in modern production engineering. The material can either be caused to stick to the molding surface or to be released by the inclusion of a micro thin layer of release agent. The result is an exact replica of the tool surface even down to the finest surface texture.
Typical Applications:
Low friction slideways
Slideways repair coatings
Bushings
Lead screw nuts
Complex replicated running surfaces
Spheres
Hydrostatic bearings
Safety Data Sheets:
Hardener
Moglice FL/P Resin
Moglice FL/P
Moglice P500
Moldable low friction way-liner to produce high-precision slideways with anti-stick-slip properties. The molding method allows to create complex forms and structures down to the micron without mechanical machining. It helps to reduce production times in modern production engineering. The material can either be caused to stick to the molding surface or to be released by the inclusion of a micro thin layer of release agent. The result is an exact replica of the tool surface even down to the finest surface texture.
Typical Applications:
Low friction slideways
Slideways repair coatings
Bushings
Lead screw nuts
Complex replicated running surfaces
Spheres
Hydrostatic bearings
Safety Data Sheets:
Hardener
Moglice 500 Resin
Moglice Putty Hard
Moldable low friction way-liner to produce high-precision slideways with anti-stick-slip properties. The molding method allows to create complex forms and structures down to the micron without mechanical machining. It helps to reduce production times in modern production engineering. The material can either be caused to stick to the molding surface or to be released by the inclusion of a micro thin layer of release agent. The result is an exact replica of the tool surface even down to the finest surface texture.
Typical Applications:
Low friction slideways
Slideways repair coatings
Bushings
Lead screw nuts
Complex replicated running surfaces
Spheres
Hydrostatic bearings
Safety Data Sheets:
Hardener
Moglice Putty Hard Resin
Moglice Putty Hard
Score EX Cast Iron (CI) 500 gram kit
Score EX Cast Iron is the perfect material for small and medium surface repairs on cast iron. Due to its high number of fillers Score-EX Cast Iron has a fantastic metal finish and is machinable like cast iron. With its fast-curing time and flexible mixing ratio it is a very useful product for various types of industry.
Pot Life – 15 minutes
Cures – 45-60 minutes
IN THE KIT:
Score EX Powder
Score EX Liquid Hardener
1 Tablespoon
2 Tongue Depressors
Instructions
To Find the Grams of Moglice Required:
Example: 48″ Length x 5″ Width x .062″ Thickness = 14.88 cubic inches x 33 (FL/P) = 491 Grams of Moglice Needed
Machine Tool
Way Rebuilding
Click the button below to download the Machine Tool Way Rebuilding Handbook. Requires Adobe Acrobat Reader to view.
